rate of deformation
英 [reɪt ɒv ˌdiːfɔːˈmeɪʃn]
美 [reɪt əv ˌdiːfɔːrˈmeɪʃn]
网络 变形速率; 变形率
双语例句
- Studies show that EME usually becomes stronger with the increase of load and the rate of deformation.
研究表明，电磁辐射基本上随着加载及变形速率的增加而增强； - The deformation resistance of 2198 Al-Li alloy is sensitive to temperature and strain rate. This leads to difficulty of deformation.
该合金在变形过程中，变形抗力对变形温度和变形速率很敏感，导致成型困难。 - The left-lateral strike-slip movement is the main horizontal deformation, the rate of the vertical deformation is less than horizontal deformation, and showed the character that fault hanging wall uplift alternates with down.
菱形块体的现今水平形变以左旋走滑运动为主，垂直形变速率较低，且呈上盘抬升与下降交替出现的运动特征； - Stress-Strain Rate Relationship of Superplastic Deformation
超塑性变形的应力应变速率关系 - The load-displacement curves for the cases of high implantation fluence and fluence rate displayed the characteristics of elastic deformation, while those for the cases of pristine and low implantation fluence and fluence rate displayed the characteristics of elastic-plastic deformation.
未注入以及低剂量和剂量率注入塑料的载荷-位移曲线呈现弹塑性变形特征，而高剂量和剂量率注入的呈现出弹性变形特征。 - However, when the rate of deformation increase from 20% to 30%, the capability decreases, as the rate increases to 40%, the capability increases.
但形变率从20%增加到30%时，浆料的充型性能反而有所降低，形变率从30%增加到40%时，浆料的充型性能增加。 - The rate of bubble deformation and the contact angle increase as the electric field strength increases.
随着场强的增加，汽泡变形量加剧，汽泡与壁面的接触角逐渐变大。 - A repeated period of measurement across the fault is mainly determined by observation accuracy and rate of deformation. It is the best period for they to match reasonably.
跨断层测量的复测周期主要由观测精度和断层位移速度决定，二者合理匹配的周期就是最佳周期。 - During the isothermal constant strain rate compression process, the effect of deformation heating on flow stress increases with increasing equivalent strain rate.
在等温恒应变速率压缩过程中，随着等效应变速率的增大，变形热效应对流动应力的影响程度增大。 - In compression test of rock loading in a constant rate of deformation way will undoubtedly lead to non synchronism between deformation and load response.
在岩石压缩试验中，按等变形速率加值，势必造成变形和荷载响应的不同步，即一个匀速而另一个则出现加速或减速现象；